生产动作流程
干巾人工放置于输送带→喷淋加液→挤压(压出多余液体)→湿巾输出
Dry towels are manually placed on the conveyor belt → spray and add liquid → squeeze (press out excess liquid) → wet wipes output
采用耐磨聚氨酯打孔皮带输送;
采用上下可调式调节挤液压力机构;
整机采用304不锈钢制作(链条、链轮等传动部分部件除外);
整机12只喷头、喷水管有伐门控制、喷水量大小可调;
机身带脚轮,方便移动;
主机采用变频调速电机,噪音低、效率高;
水泵采用自吸式工程塑料耐腐泵,无锈水。
Using wear-resistant polyurethane perforated belt conveyor;
Adjust the squeezing pressure mechanism adjustable up and down;
The whole machine is made of 304 stainless steel (except the transmission parts such as chains and sprockets);
The 12 spray heads and spray pipes of the whole machine are controlled by cutting gate, and the size of spray water is adjustable;
The body has casters for easy movement;
The main machine adopts frequency conversion motor, which has low noise and high efficiency;
llWater pump adopts self-priming engineering plastic corrosion-resistant pump, no rust water
参数名称 | 参数值 |
---|---|
设备名称 | 喷淋机 |
型号 | YWJ-SP-BC |
适用产品 | 水刺/针刺/热风/木浆复合无纺布及无尘纸等 |
输送带宽度 | 200mm |
通过高度范围 | 10-150mm |
加液方式 | 多管道喷淋(液量可调) |
喷淋区长度 | 1250mm |
加工能力 | 600 kg/班,线速度:10 米 /min |
切割锯速度 | 30-120切/分钟 |
电源电压及频率 | 380V 0.75kw+1.5 kw |
设备重量 | 300kg |
生产占地面积 | 3300mm×500mm×1280mm |
气源需求 | 无 |